Morris County delivery area
Morris County, NJ Sheet Metal Fabrication for Snow and Ice
Sheet metal fabrication for Morris County, NJ starts with snow: how much lands on a roof, where it slides and where ice tends to form. We make standing seam panels, wall panels, coping and trim to your roofer’s or installer’s dimensions, and we deliver the finished order to the job or hold it for pickup at the shop.
- 5 on Google (4 reviews)
- 26+ years of experience
- Delivery or shop pickup
How much snow should a Morris County roof be designed for?
The design value comes from your exact address, not a county average. New Jersey does not publish a single statewide snow number.
DCA Bulletin 19-1 tells designers to look up ground snow loads with ASCE 7-based hazard tools using the full address. Where a tool returns a “case study” result instead of a number, the state allows a fallback of 35 psf in Morris County. The bulletin also warns that a ZIP code centroid can underestimate the load, and that values can depend on elevation.
Elevation is the reason this matters here. The county climbs from the Passaic valley in the east to the hills and lake country around Jefferson, Roxbury and Mount Arlington. For a new building or an addition, the engineer’s snow value sets the panel gauge, clip spacing and snow retention, and we fabricate to the gauge the drawings call for.
Why do ice dams form, and how does a metal roof help?
Ice dams start with heat, not with the roof covering. Warm air from the house melts snow on the upper roof, the water runs down to the cold eave and refreezes, and the ridge of ice traps more water behind it.
That explanation comes from the University of Minnesota Extension, which stresses air sealing and insulation along with ventilation. A metal roof does not fix a leaky attic, but its smooth surface sheds snow more readily than shingles, and its seams sit well above the water line.
- An ice barrier membrane at the eaves is required by code only in Sussex County (DCA Bulletin 07-3), but many roofers in Morris County still lay one as standard practice.
- The underlayment under the metal is the roofer’s call; ask which type the panel maker’s instructions require.
- Attic air leaks and insulation gaps are worth fixing before a new roof goes on, and an insulation contractor or energy auditor can find them.
Where do snow guards belong on a Morris County roof?
Anywhere sliding snow could hit a person, a door, a deck, a car or a lower roof. On a metal roof that slide can be sudden and heavy.
- Above front entries, garage doors and walkways
- Over decks, porches and lower roofs that could be crushed or punctured
- Above gas meters, vents and electrical service lines
- Along driveway sides where cars park under the eave
Your roofer lays out guard rows from the roof’s slope, panel length and the design snow value. S-5!, a maker of seam clamps, says its clamps attach snow guards to standing seams without penetrating the roof (S-5! roof clamps). Tell us which clamp is planned when you order, so the seam profile and the clamp can be checked against each other. Our standing seam page covers seam heights and what to send with an order.
Morristown and the older downtowns
Morristown is the county seat, and the town has its own Historic Preservation Commission. The town’s commission page describes a seven-member body that surveys historic sites and advises the Planning Board and Board of Adjustment on applications when asked.
That is an advisory role, so the commission is one of several offices to check, alongside zoning and any district rules. Ask the town early if your building is in or next to the Morristown historic district, and settle the metal and color before you order.
Madison, Dover and Boonton have older main streets too. Their brick storefronts typically need metal coping and counter-flashing, and the older houses nearby often need new box gutter liners.
Corporate campuses and flex buildings
Parsippany-Troy Hills, Florham Park, Morris Plains, Hanover and East Hanover hold many large office, pharmaceutical and warehouse buildings. Owners often update the facade and entrance when one of those buildings changes hands.
Those facades suit our aluminum composite panels and metal wall panels, along with coping and commercial roof panels. Contractors can send drawings through the bid request page, and we prepare shop drawings for approval before fabrication. A commercial building generally needs a construction permit for a new roof or facade, which the contractor handles.
Request a quote
Or call (732) 201-5224, Mo-Fr 07:00-17:00.
Morris County at a glance, and the towns we deliver to
- County seat: Morristown, as the county history page confirms.
- Population: 509,285 in the 2020 Census; an estimated 524,251 on July 1, 2025 (Census QuickFacts).
- Climate zone: 5A for energy code purposes, shared with Somerset and Hunterdon.
- Permits: re-roofing a detached house with one or two units counts as ordinary maintenance (N.J.A.C. 5:23-2.7), while attached and commercial buildings generally need a permit; the installer confirms with the town.
Lake and highland towns: Butler, Jefferson, Kinnelon, Mount Arlington, Mount Olive, Netcong, Riverdale, Rockaway Borough, Rockaway Township, Roxbury, Washington Township and Wharton.
Central Morris: Boonton, Boonton Township, Denville, Dover, Lincoln Park, Mine Hill, Montville, Morris Plains, Morris Township, Morristown, Mountain Lakes, Parsippany-Troy Hills, Pequannock, Randolph and Victory Gardens.
Southern and eastern Morris: Chatham Borough, Chatham Township, Chester Borough, Chester Township, East Hanover, Florham Park, Hanover Township, Harding, Long Hill, Madison, Mendham Borough and Mendham Township.
Long panels and steep lake-lot driveways can complicate a drop, so describe the access when you ask about delivery to your job. Pickup at our New Brunswick shop is the other option.
We have not posted Morris County case studies yet. Buildings that used our metal will appear on the projects page after they are photographed.
Morris County questions
What snow load should my Morris County metal roof be designed for?
One based on your exact address. DCA Bulletin 19-1 requires site-specific ground snow values from ASCE 7-based tools and allows 35 psf in Morris County only when a tool cannot return a number. Your designer or roofer sets it, and we fabricate to the gauge they specify.
Does code require ice and water shield on roofs in Morris County?
No. New Jersey’s ice barrier requirement applies only where the average January temperature is 25 degrees F or lower, which state guidance identifies as Sussex County. Many roofers still put one at the eaves of houses as a matter of routine.
Do I need snow guards on a metal roof?
In Morris County they are usually needed over entries, walkways, decks, lower roofs and parking spots. Your roofer plans the rows from the roof slope, panel length and design snow value.
Does the Morristown Historic Preservation Commission have to approve my roof?
The town describes its commission as advisory: it advises the Planning Board or Board of Adjustment on applications when asked. Check with Morristown’s zoning office early, because other approvals may apply to your property.
Do you deliver to the lake communities of northern Morris County?
Jefferson, Roxbury, Mount Arlington, Mount Olive and the other lake and highland towns are on our delivery list. Ask about delivery to your job and describe steep or narrow access. Pickup at our New Brunswick shop is also an option.
Morris County orders
Getting panels and trim ready for a Morris County winter?
Send the address, the dimensions or plans, and photos of any spots where ice built up last winter. Our reply is a written quote, or questions where the drawings leave gaps, and the finished order goes to the job or waits for pickup at the shop. We also deliver to Essex County and Somerset County, and the delivery area page lists every county.