For contractors, builders and architects
Send Plans for a Metal Panel Quote from Our New Jersey Shop
Get a metal panel quote from plans: upload the drawings, specs and addenda for wall panels, ACM, coping, flashing, box gutter liners or standing seam roof panels. We read the set and reply within 24-48 hours with a written quote, or with questions. Everything is fabricated in our New Brunswick shop, then delivered or picked up.
- Owner's 26+ years in metal
- Delivery or shop pickup
- Free written quotes
What should you send with your plans?
Send the drawings and specifications that show the metal, every addendum issued so far and the bid date. The more complete the set, the fewer assumptions end up in our quote.
- The plan set: elevations, wall sections, the roof plan and enlarged details at parapets, openings and roof edges
- Specifications: the Division 07 sections that cover metal panels, composite panels, sheet metal and metal roofing
- Addenda and alternates, plus any answers already given to bidder questions
- The bid date, your bid form if there is one, and where the quote should go
- Selected colors or finishes, if the design team has chosen them
- A cut list or field dimensions, if your installer has already measured the building
Name the items you want quoted in the notes. If you only need the coping and flashing, or only the ACM, say so, and we quote just that. There is no minimum order.
No plan set? A cut list, a sketch or a photo with measurements works too. Use the quote request form, or text a photo or sketch to (732) 236-8750.
How fast will you get a quote back?
Within 24-48 hours of receiving the plans, counted in business days. You get a written quote, or our questions if something in the set is unclear.
Questions come back in writing, so you can pass them to the architect as RFIs. The quote lists every item with its metal, finish and color, the assumptions we made, and delivery or pickup.
Have a lower written quote for the same parts? Send it with your request, and we will match or beat it.
Tell us which code edition the permit set follows. New Jersey’s 2024 codes took effect on August 17, 2026, according to the Department of Community Affairs, and a grace period generally lets applicants use the prior edition for a time.
Which items can we quote?
Any exterior metal we fabricate in our shop. Pick one or several:
- Metal wall panels in our AMP concealed-fastener and exposed-fastener profiles, cut to length
- Aluminum composite panels routed and folded for wet-seal or dry-joint systems
- Parapet coping with cleats, sloped tops and splice plates
- Flashing and trim for walls, openings, roof edges and transitions
- Box gutter liners made to the dimensions your contractor takes
- Standing seam roof panels and trim, including panels for commercial roofs
We quote the fabricated metal, the accessories listed on the quote, and delivery. Installation is not part of our quote; your crew or installer prices that. See our page for contractors and builders for how submittals, shop drawings and field dimensions work.
How long does fabrication take?
Standing seam panels, coping and trim typically take 1-2 days; ACM takes longer. Typical lead times once the order is confirmed and any shop drawings are approved:
| Item | Typical lead time |
|---|---|
| Standing seam roof panels | 1-2 days |
| Coping and trim | 1-2 days, depending on color and gauge |
| ACM panels | 2-8 weeks, depending on color |
| Anything else | Stated on your quote |
Architectural and commercial jobs get shop drawings for approval where the job calls for them. A bid date or a start date that matters goes in the notes.
We deliver within about a 5-hour drive of the shop, covering New Jersey, New York, Pennsylvania, Connecticut, Delaware and Maryland. Delivery cost is quoted with the order, and pickup at the shop is available during office hours, Monday–Friday 7 AM–5 PM.
Upload plans and request a quote
Fill in the project details and attach the files. If the set is large, paste a link to a shared folder or plan room in the notes instead.
Plan quote FAQ
Questions about sending plans
What file types can I upload?
The form takes PDF, DWG, DXF, ZIP, JPG, PNG and HEIC files and shows the size limit next to the upload field. If a file will not go through, paste a download link in the notes instead.
What if my plan set is too large to upload?
Upload only the sheets that show the metal, or skip the upload and paste a link to a shared folder or plan room in the notes. Check that the link stays active until after the bid date.
How long does it take to get a quote back?
Within 24-48 hours of receiving the plans, counted in business days. You get a written quote, or our questions if something in the set is unclear.
Will you match another supplier’s quote?
Yes. Have a lower written quote for the same parts? Send it with your request, and we will match or beat it.
Do you keep my drawings confidential?
Yes. Plans you send are used only to prepare our quote and, if you order, your shop drawings and parts. Uploaded files are stored privately. If your project needs a confidentiality agreement, say so in the notes.
Do you deliver outside New Jersey?
Yes, within about a 5-hour drive of our New Brunswick shop, which takes in New York, Pennsylvania, Connecticut, Delaware and Maryland. Delivery cost is quoted with the order, and pickup at the shop is also available.
Does your quote include installation?
No. We are a fabricator only, so the quote covers the fabricated metal, the accessories listed on it, and delivery or pickup. Your crew or installer prices the installation.
Questions first?
Talk to us before you send the set
Call to talk through items, file sizes or the bid date, or send a note through our contact page. For a home or a single building without drawings, request a quote with the measurements your installer took.