Seamless gutters for your installer
K-Style Gutters Roll-Formed to Length in New Jersey
K-style gutters in NJ, 5-inch or 6-inch, roll-formed on our gutter machine to the length of each run, so every straight run is one seamless piece. We make them from aluminum, steel or copper coil, along with the end caps, miters, outlets and downspout parts that go with them.
Your installer hangs the gutters. We deliver within about a 5-hour drive of the shop, or you pick them up.
- Owner's 26+ years in metal
- Delivery or shop pickup
- Free written quotes
What is a K-style gutter?
A gutter with a flat back and bottom and a shaped front that, seen from the end, looks like crown molding. The flat back sits tight against the fascia board.
It is a common gutter shape on houses, and at a given width its flat back and deeper profile typically carry more water than a half-round gutter. Built-in gutters on older buildings are a different system; for those, see box gutter liners.
Why order seamless K-style gutters?
Fewer joints mean fewer leaks. A run formed in one piece has seams only at the corners and ends, where they are easy to seal and check.
Sectional gutter is often sold in short lengths joined along the run, and every joint is a place for a drip or a stain on the fascia. Our gutter machine forms each run from coil to the length your installer measured. For a very long run, ask about delivery when you order.
5-inch or 6-inch K-style gutters?
Many houses use 5-inch K-style gutters. The 6-inch size carries more water, so it suits large or steep roof areas, long runs and spots where water gathers, such as below a valley.
Your installer sizes the gutters for the roof, and we form whichever size they order. Our guide to 5-inch vs 6-inch K-style gutters explains how to choose.
Aluminum, steel or copper gutter coil?
Aluminum is a common choice: light, rust-free and available in painted colors. Steel is stiffer and stands up better to ladders and ice. Copper suits older homes and copper roofs, and it weathers to a patina instead of being painted.
| Gutter coil | Finish | Good fit |
|---|---|---|
| Aluminum | Painted, from the coil maker’s chart | Most houses; homes near salt air |
| Steel | Painted | Matching a steel roof; runs that take knocks |
| Copper | Natural, weathers to a patina | Older and historic homes, copper roofs and flashing |
Our guide to gutter coil: aluminum, steel or copper compares the three in more detail. Near the ocean or the bays, also read about metal near the Jersey Shore. Custom (non-stock) colors carry a minimum quantity.
Which gutter parts do we make?
The gutters and the fabricated parts that go with them, in the same size, metal and color as the runs.
- Seamless runs, 5-inch or 6-inch, each formed to its measured length.
- End caps, left and right, to close each open end.
- Inside and outside miters for the corners where two runs meet.
- Outlets where each downspout drops from the gutter.
- Downspout parts in matching metal and color.
Need drip edge or fascia wrap behind the gutter? We bend those too; see custom trim and brake metal.
What should your installer send for a K-style gutter quote?
The size, metal and color, the length of every straight run, and where the corners, outlets and ends fall. A roof sketch with the runs marked A, B, C works well.
- 5-inch or 6-inch, and the metal and color
- Length of each run, measured on the building by your installer
- Each corner: inside or outside, and which two runs it joins
- Outlet positions along each run
- End caps needed, left or right
- Downspout count and lengths
Send it with a quote request, email info@architecturalmetalpanels.net, or text us a photo of the sketch. We reply with a written quote within 24-48 hours (business days), and the lead time is on your quote. There is no minimum order.
Finished gutters can be delivered within about a 5-hour drive of our New Brunswick shop, which takes in New Jersey, New York, Pennsylvania, Connecticut, Delaware and Maryland; the delivery cost appears on the quote. Pickup is at the shop, Monday–Friday 7 AM–5 PM. Have a lower written quote for the same gutters? Send it with your request and we will match or beat it.
K-style gutter questions
What sizes of K-style gutter do you make?
5-inch and 6-inch, both roll-formed to length on our gutter machine, with end caps, miters, outlets and downspout parts to match.
Can a long run be made in one piece?
Yes. Each straight run is formed to the length your installer measured, so it has no joints between the ends. For a very long run, ask about delivery when you order.
Which metals can the gutters be?
Aluminum, steel or copper coil. Aluminum and steel come in painted colors from the coil maker’s chart, and copper weathers to a natural patina.
Can I pick up gutters at the shop?
Yes, during office hours, Monday–Friday 7 AM–5 PM. We also deliver within about a 5-hour drive of the shop, with the delivery cost quoted with the order.
Do you install gutters?
No. We are a fabrication shop. We roll-form the gutters and make the parts to your installer’s measurements, and your installer hangs them.
Request a quote
Tell us what you need: the product, the metal and finish, and your dimensions or cut list. Attach a photo, sketch or cut list if you have one. We reply with a written quote within 24-48 hours. Delivery within about five hours of our New Brunswick shop, or pickup.
Or text a photo or sketch with dimensions to (732) 236-8750
Prefer to talk now? Call (732) 201-5224, Monday–Friday 7 AM–5 PM. Text us a photo or sketch Fully insured
5-inch and 6-inch seamless runs
Have your gutter runs measured?
Send the size, metal, color and run lengths, with the corners and outlets marked. We reply with a written quote, then the gutters and parts are delivered or ready for pickup.