Corrugated wall panels made to your cut list
Corrugated Metal Wall Panels for New Jersey Buildings and Homes
Corrugated metal wall panels are steel or aluminum sheets formed into a repeating rounded wave and fastened through the face. We supply them in two AMP profiles, made to the lengths on your installer’s cut list, with the trim bent in our New Jersey shop. Written quotes come back within 24-48 hours, and orders are delivered or picked up at the shop.
- Owner's 26+ years in metal
- Delivery or shop pickup
- Free written quotes
What is a corrugated metal wall panel?
It is a sheet that gets its strength from rounded waves formed across its width. Screws go through the face into girts or furring, so the fasteners stay easy to inspect and replace.
That simplicity is the appeal. A damaged corrugated panel can be swapped for a new one made to the same length, and the wave hides small dents and waviness in the wall behind it.
Ribbed panels are a different family. The AMP PBR panel and the AMP 7.2 Rib have raised ribs, not rounded waves. Our metal wall panels hub compares every profile we make.
Which corrugated profile should you choose?
Choose the 1/2-inch profile for the classic corrugated look on everyday walls. Choose the 7/8-inch profile for taller walls, higher loads or bolder shadow lines, or when you want aluminum.
| Item | AMP 2.67″ x 1/2″ corrugated | AMP 2.67″ x 7/8″ corrugated |
|---|---|---|
| Depth | 1/2″ | 7/8″ |
| Wall coverage | 40″ | 34.67″ |
| Roof coverage | 37.334″ | 32″ |
| Overall width | 41.25″ | 36″ |
| Metals | 24 or 22 ga steel | 24 or 22 ga steel; .032″ or .040″ aluminum |
| Character | Classic corrugated look | Deeper industrial wave, heavier shadow lines, higher load capacity |
- Everyday walls, classic look: the AMP 2.67″ x 1/2″ corrugated panel, in 24 gauge or 22 gauge for walls that take knocks.
- Tall walls, higher loads or aluminum: the AMP 2.67″ x 7/8″ corrugated panel.
Why is roof coverage narrower? On both profiles it is one 2.67-inch corrugation less than wall coverage, because roof panels overlap one more wave at the side lap.
Corrugated or concealed fastener: which is right?
Corrugated is simpler to fasten, inspect and repair. Concealed-fastener panels hide every screw for a finished, architectural face.
- Choose corrugated for industrial and utility buildings, garages, enclosures and designs that show their construction.
- Choose concealed fastener for office fronts, storefronts and homes where screw rows would distract. See the AMP Wave 16-4 and AMP Wave 12-3.
Many buildings mix them: corrugated on the service sides and a concealed-fastener panel on the street front.
Can a house have corrugated metal walls?
Yes. Corrugated walls suit modern homes, detached garages, backyard studios and accent walls. On wood framing, your installer sets the panels over sheathing and a weather-resistive barrier, usually on furring that leaves a drainage space.
Many owners pick a wall color that works with a metal roof on the same house. Send the wall dimensions or plans from your installer; we fabricate to those numbers and do not measure on site.
What trim does a corrugated wall need?
Trim decides whether the wall looks crisp or improvised. The panels set the texture, and the edges finish it.
- Base: a drip base trim at the bottom of the wall, with closures your installer fits to the wave.
- Corners and openings: inside and outside corners, head flashings, jambs and sills over every cut panel end.
- Top: a top trim, cap or metal coping on a parapet.
We bend this trim in our shop as custom trim, typically in 1-2 days depending on color and gauge. Near salt water, many Galvalume warranties exclude the site; read our guide to metal near the Jersey Shore, and consider the aluminum 7/8-inch profile.
How do you order corrugated metal wall panels?
Send a cut list or plans with the profile, metal and color, and a written quote comes back within 24-48 hours. Field dimensions come from your installer.
- Profile: 2.67″ x 1/2″ or 2.67″ x 7/8″ corrugated, and wall or roof use.
- Metal and finish: 24 or 22 gauge steel, or aluminum on the 7/8-inch profile, in PVDF or SMP and a named color.
- Lengths and quantities: each panel length and count, wall by wall.
- Trim: base, corners, openings and top, with lengths.
- Delivery or pickup: the job address, or pickup at the shop during office hours, Monday–Friday 7 AM–5 PM.
The panel lead time is on your quote. There is no minimum order, and custom (non-stock) colors carry a minimum quantity. We deliver within about a 5-hour drive of the shop, across New Jersey, New York, Pennsylvania, Connecticut, Delaware and Maryland, and the delivery cost is quoted with the order. Have a lower written quote for the same parts? Send it with your request and we will match or beat it.
Corrugated wall panel questions
Are corrugated metal wall panels only for industrial buildings?
No. They are common on industrial buildings, but homeowners use them on modern houses, garages, studios and accent walls, and retailers use them for an industrial look.
Which corrugated profile should I pick?
Use the 2.67″ x 1/2″ profile for the classic look on everyday walls. Use the 2.67″ x 7/8″ profile for taller walls, higher loads, heavier shadow lines or aluminum. We can quote both if you are unsure.
What about ribbed panels like PBR?
Ribbed panels have raised ribs instead of rounded waves, so they are a separate family. The AMP PBR panel is 1-1/4 inches deep, with 36 inches of coverage and a purlin-bearing leg, and it has its own page.
How long does a corrugated wall order take?
Trim typically takes 1-2 days, depending on color and gauge, and the panel lead time is on your quote. Written quotes come back within 24-48 hours.
Do you install corrugated wall panels?
No. We are a fabrication shop. We make the panels and trim to your installer’s dimensions or approved drawings, and your installer puts them up.
Request a quote
Tell us what you need: the product, the metal and finish, and your dimensions or cut list. Attach a photo, sketch or cut list if you have one. We reply with a written quote within 24-48 hours. Delivery within about five hours of our New Brunswick shop, or pickup.
Or text a photo or sketch with dimensions to (732) 236-8750
Prefer to talk now? Call (732) 201-5224, Monday–Friday 7 AM–5 PM. Text us a photo or sketch Fully insured
Corrugated wall orders
Ready to choose a corrugated profile?
Send plans or a cut list and tell us how the wall is used. We will quote the panels and trim in writing within 24-48 hours, delivered or ready for pickup.